Installation Instructions/un-pasted wall murals
following instructions are meant as a general guideline to
installing wall murals. Please follow the specific
instructions that the manufacturer has included with your
mural. If instructions were not with your mural, please
contact us and we will provide them to you.
Installation of your Wall Mural is fun and
Just follow these simple instructions for
Prepare the wall surface as you would
for any ordinary wallpaper.
For best results, the wall should be
free of any previous wallcovering and
Lay out the design as indicated in the
Prepare the paste.
Draw a horizontal line
equidistant from floor to ceiling across the
wall...this is your guide line which will
ensure the design is centered on your wall.
Take the first panel. Apply the paste
(be sure to get the edges).
Mount the panel carefully, lining it up
with the line you drew on the wall (for
larger pieces this may require two people).
Smooth onto wall
Overlap all panels by approximately 1/8th of an inch (3mm).
Smooth onto wall. Any small bubbles will disappear once
the mural has dried.
Continue applying the panels in the
order indicated in the instruction sheet.
After the mural has completely dried,
finish off by trimming any excess.
Your Photo Mural is now complete!